Loading... Please wait...

Mustang Cold Air Intakes

Our Recommendations

A Cold Air Intake (CAI) is the 1st thing we do to our cars. It's really, really easy with a few tools and it gives you a big bang for your bucks! Your Grandma could install it for you! Rear Wheel Horsepower and Torque increases from 14 HP to 38 HP, depending on your Model Pony, is no joke. (Read the 5.0 Mustang Steeda Installation Write-up)

Many CAI's are very similar. We've listed the ones we like best below, in the order we like them. Whatever you brand you choose, the smoother the intake tube, less turns and bends it takes getting air into your Pony the better. We don't recommend those that stick your filter in the fender-well. That sharp 90 degree turn right at the filter screws up your air flow and in heavy rain you can soak your filter causing your ride to stall or even worse if it manages to suck in much water. 

Steeda is our number one favorite. They're constructed of a combination of aluminum and plastic and don't suffer the heat-soak that all aluminum CAI's do, which rob you of some of your performance gain. Which is just a sin in our book! If you run the Car Show circuit with your 2005 and up Mustang, we recommend the Steeda Carbon Fiber intake. Otherwise, there's no reason to spend the extra money and we recommend the standard Steeda Pro-Flow intakes.  We especially love the Velocity Stack versions for 94-04 Mustang's. At $199.95, they're a steal! They don't involve swapping out the whole intake tube, which is even easier and keeps the cost down. And when you're budgeting for your list of mods, anyway you can save without sacrificing quality or performance is a big win!

After Steeda, the Airaid systems are as good and any of the others out there like JLT, C&L, etc... and they don't require a Tune. However, a tune will improve performance (Read 5.0 Magazine's recent Airaid Review) Also, they are constructed of mostly plastic, which means they don't suffer heat soak from your engine affecting your performance gains as your Stang heat's up. That's a good thing!

If you have to have that shinny CAI because you plan to run the Car Show circuit, we recommend the BBK's. They're very well designed; solid and dress up the old engine bay. They also cover a larger array of Mustangs from 1986-2011. They will suffer a little from heat-soak and reduce your performance gain as your car heats up, but sometimes you have to sacrifice for beauty! (Read the 5.0 Magazine Tech Inspection)

Of cousre a nice addition for 87-04 Mustangs is our Mustang-Rush Ram-Air Kit. It insures cold air is bathing your filter and has a noticable impact on performance. 

If you have any questions contact me

More Power to the People!

-Joe Morgan

 

Steeda Autosports Cold Air Intake- Steeda Pro-Flow Cold Air Intake kit [2005-Up GT Mustang]

 2011-gt-mustang-cold-air-intake.jpggt-mustang05-09-cold-air-intake-kit.jpg

"According to Steeda: Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels with Steeda's Cold Air Kit combined with our Custom SCT Tune. Steeda's lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT XCalibrator 3 - the perfect tool for the job with Custom Tunes! The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out . Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit."

 

Steeda Carbon Fiber Cold Air Intake Kit [2005-Up Mustang]Steeda Carbon Fiber Cold Air Intake Kit [2005-Up Mustang]

"According to Steeda: Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels with Steeda's Cold Air Kit combined with our Custom SCT Tune. Steeda's lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT XCalibrator 3 - the perfect tool for the job with Custom Tunes! The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out . Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit."

 

Steeda Autosports Cold Air Intake- Mustang GT Kit (Velocity Stack) [94-04 Mustang]

 Steeda Autosports Cold Air Intake- Mustang GT Kit (Velocity Stack) [94-04 Mustang]

"According to Steeda: Gain horsepower and torque with this straightforward upgrade. Lifetime filter can be cleaned and re-oiled.The kit is supplied with a powdercoated mounting base and stainless steel heat shield with built-in velocity stack. It mounts in the factory location. Our tests showed inlet temps a mere 10 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit."


Steeda Autosports Cold Air Intake- Mach 1 Kit (Velocity Stack) [03-04 Mach 1]

 Steeda Autosports Cold Air Intake- Mach 1 Kit (Velocity Stack) [03-04 Mach 1]

"According to Steeda: Steeda High Velocity Cold Air Kits all feature a new Velocity Stack for improved airflow, bringing more oxygen into the cylinder for better combustion. Designed to work with the Mach 1 signature Shaker Hood Scoop, this model produces measurable results on the dyno - we gained 9.7 RWHP and 14.3 lb. ft. of torque on a recent installation."

 

Steeda Autosports Cold Air Intake- Velocity Stack [03-04 Cobra]

Steeda Autosports Cold Air Intake- Velocity Stack [03-04 Cobra]

According to Steeda: Steeda's cold air high-flow intake for the 03-04 Cobra features a reusable dual cone filter with more surface area than single cone models to flow the most air. The Steeda high velocity air intake features a stainless steel heat shield that seals against the hood shielding more of the air from the engine compartment heat than the competitions models. This intake is good for 14 to 18 RWHP on a stock Cobra and has been dyno tested in our Pompano Beach facility to add up to 25 RWHP on a modified Cobra. All the necessary hardware is included for a direct bolt-on installation. Used it cars exceeding 600 rear wheel horsepower!



1999-2011 Ford Mustang Airaid Intake System

1999-2011 Ford Mustang Airaid Intake System

1999-2011 Ford Mustang Airaid Cold Air Intake. Airaid Intake System Features - The Airaid Cold Air Intake System dramatically boosts airflow for great gains in horsepower and torque. Custom-fit to your specific year, make and model. Airaid Intake Systems employ a washable, reusable Airaid Filter that lasts the life of your vehicle. Available in two intake designs:. Quick Fit System: replaces the factory airbox with a high-flow filter and custom heat shield that connects to the stock intake tube. Airaid Intake System - Airaid Cold Air Intake - 600+ Reviews - Videos & Installations. For the top selection of Ford Mustang 1999-2011 Airaid Air Intake Systems shop online today. The Airaid Intake System - Airaid Cold Air Intake - 600+ Reviews - Videos & Installations will improve and personalize your vehicle. Ford Cold Air Intake by Airaid - selected by many auto enthusiasts in the top automotive discussion forums. Airaid Intake System for your 11 Ford Mustang will deliver the results you are looking for! Airaid Intake System - 1999-2011 Ford Mustang - Air Intake Systems - Cold Air Intake.

 

1986-2011 Ford Mustang BBK Power-Plus Cold Air Intake Systems

1986-2011 Ford Mustang BBK Power-Plus Cold Air Intake Systems

1986-2011 Ford Mustang BBK Cold Air Intake. BBK Power-Plus Cold Air Intake Systems Features - BBK Power-Plus Cold Air Intake Systems inject your motor with a shot of excitement. Custom designed for your exact engine. Dyno tested to produce an average of 7-21 extra horsepower (varies by vehicle). BBK builds your Power-Plus Cold Air Intake System from choice aluminum for the ideal blend of strength and lighter weight. Comes with a conical-shaped cotton gauze filter that gobbles up oxygen as it strips away impurities. BBK Cold Air Intake Systems, BBK CAI - Videos, Installations & Reviews. For the top selection of Ford Mustang 1986-2011 BBK Air Intake Systems shop online today. The BBK Cold Air Intake Systems, BBK CAI - Videos, Installations & Reviews will improve and personalize your vehicle. Ford Cold Air Intake by BBK - selected by many auto enthusiasts in the top automotive discussion forums. BBK Power-Plus Cold Air Intake Systems for your 11 Ford Mustang will deliver the results you are looking for! BBK Power-Plus Cold Air Intake Systems - 1986-2011 Ford Mustang - Air Intake Systems - Cold Air Intake.